A broken charging port can be a big problem. Depending upon the extent of damage, you might need to take your device apart and try to fix it before going to a professional. We will explain these following steps for fixing a broken charging port on a Dell laptop.
4 Steps To Fix a Broken Charger Port on a Dell Laptop
Here is how you can fix the broken charging port of your laptop.
1. Clean The Charging Port
Start by looking for dirt or debris blocking the charging port and plug. This can prevent it from charging. There are several ways to fix the laptop not charging issue, but cleaning the charging port is the most effective one. You can use compressed air to blow away dust and grime. You can also use a sharp object, such as tweezers or a needle, to remove any stuck debris. It is not recommended to use a toothpick as it can break inside the port and cause more damage. If it still doesn’t work after using a different charger and cleaning, the problem is the charging port itself. You will need to open the device and fix it.
2. Open The Laptop
To fix the broken charger port on a Dell laptop, you must first open it to access the port. It can be a bit tricky. First, turn off your computer. Find and remove the screws holding the outer casing. Note where each screw came from so you can put them back later. Next, look for the parts near the charger port and disconnect them carefully. After removing these parts, take out the charging port from your computer. Be careful not to break any wires or fragile parts. Here is a picture of a laptop charging port that was removed.
3. Fix The Charging Port
Once you have opened your device, check the charging port for any broken parts and try to fix them. For example, tighten the metal plates around the charging port. If you see anything bent or damaged, try to straighten it. After fixing it, plug in the charger to see if the device charges. If it doesn’t, and the battery is still not charging, repair experts recommend replacing the charging port.
4. Replace the Charging Port
To replace the charging port, you must first carefully take off the cover after removing the screws and find the charging port inside. Now disconnect any cables attached to and remove the screws holding the charging port in place. Take out the old port and place the new one inside and screw it. After replacing the port, use a can of compressed air to clean your device. It helps remove any debris inside. Then reconnect any wires or cables to the new charging port, use a screwdriver to tighten the screws, and close your device.
Conclusion
Fixing a broken charger port on a Dell laptop can be a bit tricky. Start the process by cleaning the port with compressed air or a small tool to remove dirt and debris and check if it resolves the problem. If not, open the laptop to access the port. Carefully remove screws and components, then replace or fix the port according to the damage done. Be sure to clean the laptop with compressed air before reassembling it. If these steps fail, seek professional help. At Tech City, we specialize in laptop repair and can fix your broken charging port at an affordable price.
Frequently Asked Questions
Can a broken laptop charger port be fixed?
Yes, a broken laptop charger port can be fixed. It usually involves repairing or replacing the damaged part.
Is a broken charging port fixable?
Yes, a broken charging port is fixable. You may need professional help or specific tools to do it properly.
Can I replace my own charging port?
Yes, you can replace your own charging port if you have the right tools and follow detailed instructions. However, it can be tricky and might be easier with professional help.
